notes_brot

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
Last revisionBoth sides next revision
notes_brot [2014/11/16 18:19] – brotnotes_brot [2021/01/31 23:03] – [Notizzettel vom brot] brot
Line 1: Line 1:
 ====== Notizzettel vom brot ====== ====== Notizzettel vom brot ======
 +===== Reset HP OfficeJet Pro 8600 Plus ===== 
 +<code> 
 +My printer is a N911n, and I have not found a consistent way to reset it. 
 +I did get the Home, Back, Home, Home to work possibly one time a couple months ago, so not sure if the Oct 31st firmware changed something, 
 +as I have not been able to do any kind of reset.   
 +(tried the Back x 4-5 times as well at boot up, but nothing happens, after power off/unplugging for 1-10 mins). 
 +</code>
 ===== NAS Einführung btrfs ===== ===== NAS Einführung btrfs =====
  
Line 84: Line 90:
 </code> </code>
  
 +==== Kopieren der EFI-Partition ====
 +nas brot # umount /boot/efi
 +nas brot # cp /dev/sda1 /dev/sdd1
 +nas brot # cp /dev/sda1 /dev/sde1
 +
 +==== Hinzufügen der /boot-Partitionen zum bestehenden RAID1 ====
 +
 +<code bash>
 +nas brot # mdadm -D /dev/md0
 +/dev/md0:
 +        Version : 1.0
 +  Creation Time : Fri Aug 24 04:18:31 2012
 +     Raid Level : raid1
 +     Array Size : 511988 (500.07 MiB 524.28 MB)
 +  Used Dev Size : 511988 (500.07 MiB 524.28 MB)
 +   Raid Devices : 2
 +  Total Devices : 3
 +    Persistence : Superblock is persistent
 +
 +    Update Time : Sun Nov 16 19:15:17 2014
 +          State : clean 
 + Active Devices : 2
 +Working Devices : 3
 + Failed Devices : 0
 +  Spare Devices : 1
 +
 +           Name : localhost.localdomain:0
 +           UUID : 262c8e68:c7c4fa6d:19af27e8:0cfc68a1
 +         Events : 248
 +
 +    Number   Major   Minor   RaidDevice State
 +       0       8        2        0      active sync   /dev/sda2
 +       4       8       33        1      active sync   /dev/sdc1
 +
 +       3       8       17        -      spare   /dev/sdb1
 +nas brot # mdadm --verbose --manage --add /dev/md0 /dev/sdd2
 +mdadm: added /dev/sdd2
 +nas brot # mdadm --verbose --manage --add /dev/md0 /dev/sde2
 +mdadm: added /dev/sde2
 +nas brot # cat /proc/mdstat 
 +Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] 
 +md2 : active raid5 sdb3[6] sdc3[5] sda3[0]
 +      52430848 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU]
 +      
 +md4 : active raid5 sdb4[2] sdc4[1] sda4[3]
 +      5753362432 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU]
 +      bitmap: 0/22 pages [0KB], 65536KB chunk
 +
 +md0 : active raid1 sde2[5](S) sdd2[2](S) sdb1[3](S) sdc1[4] sda2[0]
 +      511988 blocks super 1.0 [2/2] [UU]
 +      
 +unused devices: <none>
 +nas brot # mdadm /dev/md0 --fail /dev/sdc1
 +mdadm: set /dev/sdc1 faulty in /dev/md0
 +nas brot # mdadm /dev/md0 --fail /dev/sdb1
 +mdadm: set /dev/sdb1 faulty in /dev/md0
 +nas brot # cat /proc/mdstat 
 +Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] 
 +md2 : active raid5 sdb3[6] sdc3[5] sda3[0]
 +      52430848 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU]
 +      
 +md4 : active raid5 sdb4[2] sdc4[1] sda4[3]
 +      5753362432 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU]
 +      bitmap: 0/22 pages [0KB], 65536KB chunk
 +
 +md0 : active raid1 sde2[5] sdd2[2](S) sdb1[3](S) sdc1[4](F) sda2[0]
 +      511988 blocks super 1.0 [2/1] [U_]
 +      [==========>..........]  recovery = 52.9% (270912/511988) finish=0.0min speed=67728K/sec
 +nas brot # mdadm /dev/md0 --remove /dev/sdb1 /dev/sdc1
 +mdadm: hot removed /dev/sdb1 from /dev/md0
 +mdadm: hot removed /dev/sdc1 from /dev/md0
 +nas brot # mdadm -D /dev/md0
 +/dev/md0:
 +        Version : 1.0
 +  Creation Time : Fri Aug 24 04:18:31 2012
 +     Raid Level : raid1
 +     Array Size : 511988 (500.07 MiB 524.28 MB)
 +  Used Dev Size : 511988 (500.07 MiB 524.28 MB)
 +   Raid Devices : 2
 +  Total Devices : 3
 +    Persistence : Superblock is persistent
 +
 +    Update Time : Sun Nov 16 19:41:39 2014
 +          State : clean 
 + Active Devices : 2
 +Working Devices : 3
 + Failed Devices : 0
 +  Spare Devices : 1
 +
 +           Name : localhost.localdomain:0
 +           UUID : 262c8e68:c7c4fa6d:19af27e8:0cfc68a1
 +         Events : 277
 +
 +    Number   Major   Minor   RaidDevice State
 +       0       8        2        0      active sync   /dev/sda2
 +       5       8       66        1      active sync   /dev/sde2
 +
 +       2       8       50        -      spare   /dev/sdd2
 +nas brot # mdadm --grow /dev/md0 --raid-devices=3
 +raid_disks for /dev/md0 set to 3
 +unfreeze
 +nas brot # mdadm -D /dev/md0
 +/dev/md0:
 +        Version : 1.0
 +  Creation Time : Fri Aug 24 04:18:31 2012
 +     Raid Level : raid1
 +     Array Size : 511988 (500.07 MiB 524.28 MB)
 +  Used Dev Size : 511988 (500.07 MiB 524.28 MB)
 +   Raid Devices : 3
 +  Total Devices : 3
 +    Persistence : Superblock is persistent
 +
 +    Update Time : Sun Nov 16 19:45:49 2014
 +          State : clean, degraded, recovering 
 + Active Devices : 2
 +Working Devices : 3
 + Failed Devices : 0
 +  Spare Devices : 1
 +
 + Rebuild Status : 81% complete
 +
 +           Name : localhost.localdomain:0
 +           UUID : 262c8e68:c7c4fa6d:19af27e8:0cfc68a1
 +         Events : 296
 +
 +    Number   Major   Minor   RaidDevice State
 +       0       8        2        0      active sync   /dev/sda2
 +       5       8       66        1      active sync   /dev/sde2
 +       2       8       50        2      spare rebuilding   /dev/sdd2
 +</code>
 +
 +==== btrfs Filesystem erzeugen und Subvolumes anlegen ====
 +<code bash>
 +nas brot # mkfs.btrfs -d raid1 -m raid1 /dev/sdd3 /dev/sde3
 +
 +nas brot # btrfs filesystem show /dev/sdd3
 +Label: none  uuid: c356873f-4034-43cc-8052-b2a4bf68cb26
 +        Total devices 2 FS bytes used 112.00KiB
 +        devid    1 size 4.55TiB used 2.03GiB path /dev/sdd3
 +        devid    2 size 4.55TiB used 2.01GiB path /dev/sde3
 +
 +Btrfs v3.17
 +
 +nas brot # mount /dev/sdd3 /mnt/btrfs_rootsubvol/
 +
 +nas brot # btrfs subvolume create /mnt/btrfs_rootsubvol/root-subvol
 +Create subvolume '/mnt/btrfs_rootsubvol/root-subvol'
 +nas brot # btrfs subvolume create /mnt/btrfs_rootsubvol/data-subvol
 +Create subvolume '/mnt/btrfs_rootsubvol/data-subvol'
 +nas brot # btrfs subvolume create /mnt/btrfs_rootsubvol/backup-subvol
 +Create subvolume '/mnt/btrfs_rootsubvol/backup-subvol'
 +nas brot # btrfs subvolume create /mnt/btrfs_rootsubvol/brot-backup-subvol
 +Create subvolume '/mnt/btrfs_rootsubvol/brot-backup-subvol'
 +
 +nas brot # btrfs fi df /mnt/btrfs_rootsubvol/
 +Data, RAID1: total=1.00GiB, used=512.00KiB
 +Data, single: total=8.00MiB, used=0.00B
 +System, RAID1: total=8.00MiB, used=16.00KiB
 +System, single: total=4.00MiB, used=0.00B
 +Metadata, RAID1: total=1.00GiB, used=176.00KiB
 +Metadata, single: total=8.00MiB, used=0.00B
 +GlobalReserve, single: total=16.00MiB, used=0.00B
 +
 +nas ~ # btrfs subvolume list /mnt/btrfs_rootsubvol/
 +ID 258 gen 155 top level 5 path root-subvol
 +ID 259 gen 8 top level 5 path data-subvol
 +ID 260 gen 9 top level 5 path backup-subvol
 +ID 261 gen 10 top level 5 path brot-backup-subvol
 +
 +nas ~ # btrfs subvolume set-default 258 /mnt/btrfs_rootsubvol/
 +(setzen vom rootfs als std-subvol)
 +
 +
 +</code>
 +
 +==== Umzug Rootfs ====
 +  * Boot von USB-Stick (grml)
 +  * einbinden der alten Dateisysteme (/dev/md2 als /, md1 als /boot und EFI)
 +  * einbinden des neuen BTRFS-Volumes ( auf die richtige Subvolume zuordnung achten)
 +  * cp -a /mnt/old_rootfs /mnt/btrfs-rootsubvol
 +  * grml-chroot /mnt/btrfs-rootsubvol /bin/bash
 +    * grub-install /dev/sdd
 +    * grub-install /dev/sde
 +    * fstab anpassen - nur die wichtigen einträge aktiv lassen um bootfehler zu vermeiden
 +    * initrd (u kernel) neubauen mit dracut 
 +
 +<code bash>
 +/dev/md0                /boot                           ext4            noatime         1 2
 +UUID=c356873f-4034-43cc-8052-b2a4bf68cb26       /       btrfs           noatime         0 1
 +UUID=4549-7F03          /boot/efi                       vfat            defaults        0 2
 +</code>
 +
 +==== Kopieren der Daten ====
 +
 +  * Einbinden der Subvolumes (primär erstmal daten und backup)
 +  * mount -o ro /dev/md4 /mnt/raid_datenpartition
 +  * cp -av /mnt/raid_datenpartition/Daten /mnt/btrfs-daten-subvol/ | tee cp-log.tee
 +  * 
 +
 +==== Kopieren der Backups ====
 +
 +Problem: btrfs-image-files auf den alten FS. Jetzt: subvolumes auf dem btrfs-fs
 +
 +Lösung: Übertragen aller Snapshots per btrfs send/receive
 +
 +<code bash>
 +nas ~ # for i in $( ls /mnt/current_backup_file/ | grep backup); do btrfs property set -t s /mnt/current_backup_file/$i ro true; done
 +nas ~ # btrfs send -v /mnt/current_backup_file/backup-2011.11.07-22\:43/ | btrfs receive -v /mnt/btrfs-brot-backup-subvol/
 +At subvol /mnt/current_backup_file/backup-2011.11.07-22:43/
 +At subvol backup-2011.11.07-22:43
 +receiving subvol backup-2011.11.07-22:43 uuid=9c52dfc1-499f-9640-a4f9-0f8b89974a61, stransid=0
 +</code>
 +
 +==== Hinzufügen der alten Platten in den BTRFS-Pool ====
 +
 +  * Platte sdc soll dem BTRFS-RAID1 hinzugefügt werden (sda und sdb sind die neuen Platten)
 +  * Degradieren der RAID5s
 +  * Neupartitionieren der Platte
 +
 +<code bash>
 +nas brot # mdadm -D /dev/md2
 +/dev/md2:
 +        Version : 1.2
 +  Creation Time : Tue Aug 28 04:45:52 2012
 +     Raid Level : raid5
 +     Array Size : 52430848 (50.00 GiB 53.69 GB)
 +  Used Dev Size : 26215424 (25.00 GiB 26.84 GB)
 +   Raid Devices : 3
 +  Total Devices : 3
 +    Persistence : Superblock is persistent
 +
 +    Update Time : Mon Nov 17 23:42:11 2014
 +          State : clean 
 + Active Devices : 3
 +Working Devices : 3
 + Failed Devices : 0
 +  Spare Devices : 0
 +
 +         Layout : left-symmetric
 +     Chunk Size : 512K
 +
 +           Name : localhost.localdomain:2
 +           UUID : a9d908f3:f8632fcf:59a69085:83d5f6aa
 +         Events : 10324
 +
 +    Number   Major   Minor   RaidDevice State
 +       0       8       51        0      active sync   /dev/sdd3
 +       6       8       67        1      active sync   /dev/sde3
 +       5       8       35        2      active sync   /dev/sdc3
 +nas brot # mdadm -D /dev/md4
 +/dev/md4:
 +        Version : 1.2
 +  Creation Time : Mon Dec  9 22:06:12 2013
 +     Raid Level : raid5
 +     Array Size : 5753362432 (5486.83 GiB 5891.44 GB)
 +  Used Dev Size : 2876681216 (2743.42 GiB 2945.72 GB)
 +   Raid Devices : 3
 +  Total Devices : 3
 +    Persistence : Superblock is persistent
 +
 +  Intent Bitmap : Internal
 +
 +    Update Time : Sun Nov 30 21:05:22 2014
 +          State : clean 
 + Active Devices : 3
 +Working Devices : 3
 + Failed Devices : 0
 +  Spare Devices : 0
 +
 +         Layout : left-symmetric
 +     Chunk Size : 512K
 +
 +           Name : nas:4  (local to host nas)
 +           UUID : f6924d42:7358df85:416f97f9:83aeac62
 +         Events : 16217
 +
 +    Number   Major   Minor   RaidDevice State
 +       3       8       52        0      active sync   /dev/sdd4
 +       1       8       36        1      active sync   /dev/sdc4
 +       2       8       68        2      active sync   /dev/sde4
 +</code>
 +<code bash>
 +nas brot # mdadm --manage --set-faulty /dev/md2 /dev/sdc3
 +mdadm: set /dev/sdc3 faulty in /dev/md2
 +nas brot # mdadm --manage --set-faulty /dev/md4 /dev/sdc4
 +mdadm: set /dev/sdc4 faulty in /dev/md4
 +nas brot # mdadm --manage /dev/md2 -r /dev/sdc3
 +mdadm: hot removed /dev/sdc3 from /dev/md2
 +nas brot # mdadm --manage /dev/md4 -r /dev/sdc4
 +mdadm: hot removed /dev/sdc4 from /dev/md4
 +</code>
 +<code bash>
 +nas brot # mdadm -D /dev/md4
 +/dev/md4:
 +        Version : 1.2
 +  Creation Time : Mon Dec  9 22:06:12 2013
 +     Raid Level : raid5
 +     Array Size : 5753362432 (5486.83 GiB 5891.44 GB)
 +  Used Dev Size : 2876681216 (2743.42 GiB 2945.72 GB)
 +   Raid Devices : 3
 +  Total Devices : 2
 +    Persistence : Superblock is persistent
 +
 +  Intent Bitmap : Internal
 +
 +    Update Time : Sun Dec  7 12:07:18 2014
 +          State : clean, degraded 
 + Active Devices : 2
 +Working Devices : 2
 + Failed Devices : 0
 +  Spare Devices : 0
 +
 +         Layout : left-symmetric
 +     Chunk Size : 512K
 +
 +           Name : nas:4  (local to host nas)
 +           UUID : f6924d42:7358df85:416f97f9:83aeac62
 +         Events : 16220
 +
 +    Number   Major   Minor   RaidDevice State
 +       3       8       52        0      active sync   /dev/sdd4
 +       2       0        0        2      removed
 +       2       8       68        2      active sync   /dev/sde4
 +</code>
 +<code bash>
 +nas brot # gdisk /dev/sdc
 +GPT fdisk (gdisk) version 0.8.10
 +
 +Partition table scan:
 +  MBR: protective
 +  BSD: not present
 +  APM: not present
 +  GPT: present
 +
 +Found valid GPT with protective MBR; using GPT.
 +
 +Command (? for help): p
 +Disk /dev/sdc: 5860533168 sectors, 2.7 TiB
 +Logical sector size: 512 bytes
 +Disk identifier (GUID): 0C5623E2-2FF4-4787-9609-750745C161DA
 +Partition table holds up to 128 entries
 +First usable sector is 34, last usable sector is 5860533134
 +Partitions will be aligned on 2048-sector boundaries
 +Total free space is 2014 sectors (1007.0 KiB)
 +
 +Number  Start (sector)    End (sector)  Size       Code  Name
 +   1            2048         1026047   500.0 MiB   EF00  EFI System
 +   2         1026048         2050047   500.0 MiB   FD00  Linux RAID
 +   3         2050048       106907647   50.0 GiB    FD00  Linux RAID
 +   4       106907648      5860533134   2.7 TiB     FD00  
 +
 +Command (? for help): d
 +Partition number (1-4): 4
 +
 +Command (? for help): d
 +Partition number (1-3): 3
 +
 +Command (? for help): p
 +Disk /dev/sdc: 5860533168 sectors, 2.7 TiB
 +Logical sector size: 512 bytes
 +Disk identifier (GUID): 0C5623E2-2FF4-4787-9609-750745C161DA
 +Partition table holds up to 128 entries
 +First usable sector is 34, last usable sector is 5860533134
 +Partitions will be aligned on 2048-sector boundaries
 +Total free space is 5858485101 sectors (2.7 TiB)
 +
 +Number  Start (sector)    End (sector)  Size       Code  Name
 +   1            2048         1026047   500.0 MiB   EF00  EFI System
 +   2         1026048         2050047   500.0 MiB   FD00  Linux RAID
 +
 +Command (? for help): n
 +Partition number (3-128, default 3): 
 +First sector (34-5860533134, default = 2050048) or {+-}size{KMGTP}: 
 +Last sector (2050048-5860533134, default = 5860533134) or {+-}size{KMGTP}: 
 +Current type is 'Linux filesystem'
 +Hex code or GUID (L to show codes, Enter = 8300): 
 +Changed type of partition to 'Linux filesystem'
 +
 +Command (? for help): p
 +Disk /dev/sdc: 5860533168 sectors, 2.7 TiB
 +Logical sector size: 512 bytes
 +Disk identifier (GUID): 0C5623E2-2FF4-4787-9609-750745C161DA
 +Partition table holds up to 128 entries
 +First usable sector is 34, last usable sector is 5860533134
 +Partitions will be aligned on 2048-sector boundaries
 +Total free space is 2014 sectors (1007.0 KiB)
 +
 +Number  Start (sector)    End (sector)  Size       Code  Name
 +   1            2048         1026047   500.0 MiB   EF00  EFI System
 +   2         1026048         2050047   500.0 MiB   FD00  Linux RAID
 +   3         2050048      5860533134   2.7 TiB     8300  Linux filesystem
 +
 +Command (? for help): w
 +
 +Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
 +PARTITIONS!!
 +
 +Do you want to proceed? (Y/N): y
 +OK; writing new GUID partition table (GPT) to /dev/sdc.
 +The operation has completed successfully.
 +</code>
 +<code bash>
 +nas brot # btrfs device add /dev/sdc3 / -f
 +nas brot # btrfs balance start -v /
 +Dumping filters: flags 0x7, state 0x0, force is off
 +  DATA (flags 0x0): balancing
 +  METADATA (flags 0x0): balancing
 +  SYSTEM (flags 0x0): balancing
 +nas brot # watch -n 10 'btrfs balance status /'
 +Balance on '/' is running
 +1 out of about 3680 chunks balanced (2 considered), 100% left
 +</code>
 +
 +<code>
 +nas brot # mdadm -D /dev/md4
 +/dev/md4:
 +        Version : 1.2
 +  Creation Time : Mon Dec  9 22:06:12 2013
 +     Raid Level : raid5
 +     Array Size : 5753362432 (5486.83 GiB 5891.44 GB)
 +  Used Dev Size : 2876681216 (2743.42 GiB 2945.72 GB)
 +   Raid Devices : 3
 +  Total Devices : 2
 +    Persistence : Superblock is persistent
 +
 +  Intent Bitmap : Internal
 +
 +    Update Time : Sat Dec 27 10:31:33 2014
 +          State : clean, degraded
 + Active Devices : 2
 +Working Devices : 2
 + Failed Devices : 0
 +  Spare Devices : 0
 +
 +         Layout : left-symmetric
 +     Chunk Size : 512K
 +
 +           Name : nas:4  (local to host nas)
 +           UUID : f6924d42:7358df85:416f97f9:83aeac62
 +         Events : 18754
 +
 +    Number   Major   Minor   RaidDevice State
 +       3       8       52        0      active sync   /dev/sdd4
 +       2       0        0        2      removed
 +       2       8       68        2      active sync   /dev/sde4
 +
 +nas brot # mdadm -S /dev/md4
 +mdadm: stopped /dev/md4
 +nas brot # mdadm -S /dev/md2
 +mdadm: stopped /dev/md2
 +</code>
 +<code>
 +nas brot # gdisk /dev/sdd
 +GPT fdisk (gdisk) version 0.8.10
 +
 +Partition table scan:
 +  MBR: protective
 +  BSD: not present
 +  APM: not present
 +  GPT: present
 +
 +Found valid GPT with protective MBR; using GPT.
 +
 +Command (? for help): p
 +Disk /dev/sdd: 5860533168 sectors, 2.7 TiB
 +Logical sector size: 512 bytes
 +Disk identifier (GUID): 0C5623E2-2FF4-4787-9609-750745C161DA
 +Partition table holds up to 128 entries
 +First usable sector is 34, last usable sector is 5860533134
 +Partitions will be aligned on 2048-sector boundaries
 +Total free space is 2014 sectors (1007.0 KiB)
 +
 +Number  Start (sector)    End (sector)  Size       Code  Name
 +   1            2048         1026047   500.0 MiB   EF00  EFI System
 +   2         1026048         2050047   500.0 MiB   FD00  Linux RAID
 +   3         2050048       106907647   50.0 GiB    FD00  Linux RAID
 +   4       106907648      5860533134   2.7 TiB     FD00  
 +
 +Command (? for help): d
 +Partition number (1-4): 4
 +
 +Command (? for help): d
 +Partition number (1-3): 3
 +
 +Command (? for help): n
 +Partition number (3-128, default 3): 
 +First sector (34-5860533134, default = 2050048) or {+-}size{KMGTP}: 
 +Last sector (2050048-5860533134, default = 5860533134) or {+-}size{KMGTP}: 
 +Current type is 'Linux filesystem'
 +Hex code or GUID (L to show codes, Enter = 8300): 
 +Changed type of partition to 'Linux filesystem'
 +
 +Command (? for help): p
 +Disk /dev/sdd: 5860533168 sectors, 2.7 TiB
 +Logical sector size: 512 bytes
 +Disk identifier (GUID): 0C5623E2-2FF4-4787-9609-750745C161DA
 +Partition table holds up to 128 entries
 +First usable sector is 34, last usable sector is 5860533134
 +Partitions will be aligned on 2048-sector boundaries
 +Total free space is 2014 sectors (1007.0 KiB)
 +
 +Number  Start (sector)    End (sector)  Size       Code  Name
 +   1            2048         1026047   500.0 MiB   EF00  EFI System
 +   2         1026048         2050047   500.0 MiB   FD00  Linux RAID
 +   3         2050048      5860533134   2.7 TiB     8300  Linux filesystem
 +
 +Command (? for help): w
 +
 +Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
 +PARTITIONS!!
 +
 +Do you want to proceed? (Y/N): y
 +OK; writing new GUID partition table (GPT) to /dev/sdd.
 +Warning: The kernel is still using the old partition table.
 +The new table will be used at the next reboot.
 +The operation has completed successfully.
 +nas brot # gdisk /dev/sde
 +GPT fdisk (gdisk) version 0.8.10
 +
 +Partition table scan:
 +  MBR: protective
 +  BSD: not present
 +  APM: not present
 +  GPT: present
 +
 +Found valid GPT with protective MBR; using GPT.
 +
 +Command (? for help): p
 +Disk /dev/sde: 5860533168 sectors, 2.7 TiB
 +Logical sector size: 512 bytes
 +Disk identifier (GUID): 0C5623E2-2FF4-4787-9609-750745C161DA
 +Partition table holds up to 128 entries
 +First usable sector is 34, last usable sector is 5860533134
 +Partitions will be aligned on 2048-sector boundaries
 +Total free space is 2014 sectors (1007.0 KiB)
 +
 +Number  Start (sector)    End (sector)  Size       Code  Name
 +   1            2048         1026047   500.0 MiB   EF00  EFI System
 +   2         1026048         2050047   500.0 MiB   FD00  Linux RAID
 +   3         2050048       106907647   50.0 GiB    FD00  Linux RAID
 +   4       106907648      5860533134   2.7 TiB     FD00  
 +
 +Command (? for help): d
 +Partition number (1-4): 4
 +
 +Command (? for help): d
 +Partition number (1-3): 3
 +
 +Command (? for help): n
 +Partition number (3-128, default 3): 
 +First sector (34-5860533134, default = 2050048) or {+-}size{KMGTP}: 
 +Last sector (2050048-5860533134, default = 5860533134) or {+-}size{KMGTP}: 
 +Current type is 'Linux filesystem'
 +Hex code or GUID (L to show codes, Enter = 8300): 
 +Changed type of partition to 'Linux filesystem'
 +
 +Command (? for help): p
 +Disk /dev/sde: 5860533168 sectors, 2.7 TiB
 +Logical sector size: 512 bytes
 +Disk identifier (GUID): 0C5623E2-2FF4-4787-9609-750745C161DA
 +Partition table holds up to 128 entries
 +First usable sector is 34, last usable sector is 5860533134
 +Partitions will be aligned on 2048-sector boundaries
 +Total free space is 2014 sectors (1007.0 KiB)
 +
 +Number  Start (sector)    End (sector)  Size       Code  Name
 +   1            2048         1026047   500.0 MiB   EF00  EFI System
 +   2         1026048         2050047   500.0 MiB   FD00  Linux RAID
 +   3         2050048      5860533134   2.7 TiB     8300  Linux filesystem
 +
 +Command (? for help): w
 +
 +Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
 +PARTITIONS!!
 +
 +Do you want to proceed? (Y/N): y
 +OK; writing new GUID partition table (GPT) to /dev/sde.
 +Warning: The kernel is still using the old partition table.
 +The new table will be used at the next reboot.
 +The operation has completed successfully.
 +nas brot # 
 +</code>
 +<code>
 +nas brot # sync
 +nas brot # btrfs device add /dev/sdd3 / -f
 +nas brot # btrfs device add /dev/sde3 / -f
 +nas brot # btrfs balance start -v /
 +Dumping filters: flags 0x7, state 0x0, force is off
 +  DATA (flags 0x0): balancing
 +  METADATA (flags 0x0): balancing
 +  SYSTEM (flags 0x0): balancing
 +
 +(anderer screen)
 +nas brot # watch -n 10 'btrfs balance status /'
 +
 +Every 10,0s: btrfs balance status /            Tue Dec 30 11:02:30 2014
 +
 +Balance on '/' is running
 +1 out of about 4941 chunks balanced (2 considered), 100% left
  
  
Line 263: Line 868:
 </code> </code>
  
-==== Umzug ====+===== Umzug auf größere Platten =====
   - Neue Platten einhängen [x]   - Neue Platten einhängen [x]
   - Partitionen kopieren [x]   - Partitionen kopieren [x]
Line 269: Line 874:
   - Daten kopieren [x]   - Daten kopieren [x]
   - Große Platte aus altem RAID umhängen in das neue [ X ]   - Große Platte aus altem RAID umhängen in das neue [ X ]
-  - Systempartitionen auf die neuen Platten holen [ ]+  - Systempartitionen auf die neuen Platten holen [ X ]
  
 === Partitionierung nach Anpassung === === Partitionierung nach Anpassung ===
  • notes_brot.txt
  • Last modified: 2021/01/31 23:04
  • by brot